Steel Caged PG1 Gearbox Bearings and Seals

Trade Adverts from Rovertech approved traders

Moderator: Forum Moderators

rednasp
Newbie
Posts: 13
Joined: Tue Apr 24, 2012 9:48 pm
Location: Lifes highway

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by rednasp »

Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?

Or is the NASP kit still available ?
1993 220 NASP Coupe
MGJohn
RT GOD
Posts: 4209
Joined: Mon Oct 06, 2003 10:29 pm
feedback: 554712
Location: Glorious, Gloucestershire

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by MGJohn »

rednasp wrote:Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?

Or is the NASP kit still available ?
If that is the Input Shaft Bearing in the centre of the PG1 Gearbox Bell Housing I can supply a new one of those if you get stuck locally.

Premium quality steel caged.
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..

B>>M>>W ....

Arrrrrggghhhhh.........Image......Arrrrrggghhhhh.........
rednasp
Newbie
Posts: 13
Joined: Tue Apr 24, 2012 9:48 pm
Location: Lifes highway

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by rednasp »

MGJohn wrote:
rednasp wrote:Does anyone know where I can get a steel caged 4/MJ28 from for a NASP gearbox ?

Or is the NASP kit still available ?
If that is the Input Shaft Bearing in the centre of the PG1 Gearbox Bell Housing I can supply a new one of those if you get stuck locally.

Premium quality steel caged.
PM Sent.
1993 220 NASP Coupe
galleyzs21
Newbie
Posts: 6
Joined: Tue Feb 07, 2017 6:11 pm

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by galleyzs21 »

After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply.
MGJohn
RT GOD
Posts: 4209
Joined: Mon Oct 06, 2003 10:29 pm
feedback: 554712
Location: Glorious, Gloucestershire

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by MGJohn »

galleyzs21 wrote:After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply.
I have a few steel caged premium grade PG1 Bearings new in their boxes. These include actual MG-Rover ones too. some are quite expensive and far from easy to obtain now.

Refresh my memory. Which bearings are they. Positions in PG1 Box etc. I may be able to help.

John.... Gotta keep these fine old cars moving ... :drive:
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..

B>>M>>W ....

Arrrrrggghhhhh.........Image......Arrrrrggghhhhh.........
Sneekyparrot
Forum Senior
Posts: 365
Joined: Tue Sep 27, 2011 1:24 pm
feedback: 1262835
Location: Solihull
Contact:

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by Sneekyparrot »

galleyzs21 wrote:After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply.
https://www.123bearing.co.uk

http://www.brt-bearings.com/location_redditch.html

2 places i got mine from

cheers
P.
galleyzs21
Newbie
Posts: 6
Joined: Tue Feb 07, 2017 6:11 pm

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by galleyzs21 »

MGJohn wrote:
galleyzs21 wrote:After a steel cage u spec 3/LJ28 and a RJ2024, anyone able to help messaged op but no reply.
I have a few steel caged premium grade PG1 Bearings new in their boxes. These include actual MG-Rover ones too. some are quite expensive and far from easy to obtain now.

Refresh my memory. Which bearings are they. Positions in PG1 Box etc. I may be able to help.

John.... Gotta keep these fine old cars moving ... :drive:
The lower (bell housing) main shaft RJ2024
The upper input shaft still cage 3/LJ28

Missing and input shaft and gear selector seal if you happen to have them to.
MGJohn
RT GOD
Posts: 4209
Joined: Mon Oct 06, 2003 10:29 pm
feedback: 554712
Location: Glorious, Gloucestershire

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by MGJohn »

Just checked my store of new PG1 Bearings and I have a spare "UPRATE". This fits on top of the Input Shaft and locates in the upper PG1 casing ( not bellhousing )

There are two sizes of this bearing fitted into PG1s, the larger "UPRATE" version usually fitted to the Gearbox in the Rover Turbo Petrols to cater for the power increase. This image shows my spare steel caged one. Let me know if this is one of those you need. I thought I had the smaller Input Shaft Bearing which fits into the lower case ( bellhousing ) but, used my last a few weeks ago with another rebuild. This thread has reminded me to get some more of those. This one I can offer :~

Image
Apparently ... in a parallel universe MGJohn drives ....wait for it..... A ..

B>>M>>W ....

Arrrrrggghhhhh.........Image......Arrrrrggghhhhh.........
galleyzs21
Newbie
Posts: 6
Joined: Tue Feb 07, 2017 6:11 pm

Re: Steel Caged PG1 Gearbox Bearings and Seals

Post by galleyzs21 »

MGJohn wrote:Just checked my store of new PG1 Bearings and I have a spare "UPRATE". This fits on top of the Input Shaft and locates in the upper PG1 casing ( not bellhousing )

There are two sizes of this bearing fitted into PG1s, the larger "UPRATE" version usually fitted to the Gearbox in the Rover Turbo Petrols to cater for the power increase. This image shows my spare steel caged one. Let me know if this is one of those you need. I thought I had the smaller Input Shaft Bearing which fits into the lower case ( bellhousing ) but, used my last a few weeks ago with another rebuild. This thread has reminded me to get some more of those. This one I can offer :~

Image
Pm'd you, looks like what I need.
Post Reply

Return to “General Trade Adverts”